Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 39)

Select the Nighttime Colors soft-key to switch to manual
nighttime mode and to adjust the brightness of the
display using nighttime colors.
Select the Auto Color soft-key to switch to automatic
daytime/nighttime mode and to control the brightness of
the display using the light switch of the vehicle.
Touch the Up or Down arrows to adjust the Brightness.
Touch the DONE soft-key to save your settings and to
return to the AM/FM/SAT Menu.
Screen Off
To turn off the screen (so only the clock is shown, and
audio is still heard through the vehicles speakers), press
the MENU hard-key and touch the Screen Off soft-key.
Once the Screen Off is active, press any hard-key or touch
the display to deactivate it.
View Settings
Press the MENU hard-key and touch the Default View
soft-key to enable the default view mode, where the
vehicle brand logo is displayed in the right half of the
screen.
Touch the Picture View soft-key to enable the picture
view mode, where a picture can be displayed on the right
half of the radio screen. Refer to the Hard Disk Drive
section for a detailed example.
38 Uconnect® MULTIMEDIA (RADIO)