Repeat track, Bluetooth® streaming audio (btsa), Controlling btsa using the radio – Ram Trucks UCONNECT 430 for Chrysler User Manual

Page 97: Play mode, Selecting a different audio device

Advertising
background image

Repeat Track

The repeat track function repeats the currently played
track. Touch the Rpt. TRK soft-key to switch the repeat
track function on or off.

A red check mark indicates the repeat track function is
active.

BLUETOOTH® STREAMING AUDIO (BTSA)

Music can be streamed from your cellular phone through
Uconnect® Phone (if equipped) and played through the
vehicles sound system.

Controlling BTSA Using The Radio

To enter BTSA mode, press the MEDIA hard-key then
press the AUX soft-key. Or, press the Voice Command

hard key (if equipped) and after the confirmation

beep, say “Bluetooth Streaming Audio.”

Play Mode

When switching to BTSA mode, some audio devices will
start playing music directly through the vehicles sound
system. However, some devices require the music to be
initiated on the device before it will stream through
Uconnect® Phone (if equipped).

Selecting A Different Audio Device

1. Press the Uconnect® Phone

hard-key.

2. After the “Ready” prompt and the following beep, say

“Setup,” then “Select Audio Devices.”

3. You can say the name of the Audio Device to select or

say “List Audio Devices” to have Uconnect® Phone
list the available devices.

96

Uconnect® MULTIMEDIA (REMOTE DEVICES)

Advertising