Setting presets – Chrysler 2014 300 SRT - Uconnect 4.3/8.4 Manual User Manual

Page 12

Advertising
background image

Once the last digit of a station has been entered, the
DIRECT TUNE screen will close and the system will
automatically tune to that station.

The selected Station or Channel number is displayed in
the Direct Tune text box.

Undo

You can backspace an entry by touching the bottom left
Undo soft-key.

GO

When touched, the GO soft-key allows the you to commit
an entry, at which time the radio will tune to the entered
station or channel and close the Direct Tune Screen.

Screen Close

The X soft-key at the top right, provides a means to close
the Direct Tune Screen. The Direct Tune Screen also auto
closes if no activity occurs within 10 seconds.

Setting Presets

The Presets are available for all Radio Modes, and are
activated by touching any of the six Preset soft keys,
located at the top of the screen.

When you are receiving a station that you wish to
commit into memory, press and hold the desired num-
bered soft-key for more that two seconds or until you
hear a confirmation beep.

The Radio stores up to 12 presets in each of the Radio
modes. A set of 6 presets are visible at the top of the radio
screen.

You can switch between the two radio presets by touch-
ing the arrow soft-key located in the upper right of the
radio screen.

2

RADIO MODE

11

Advertising
This manual is related to the following products: