Chrysler 2014 300 SRT - Uconnect 4.3/8.4 Manual - Manual (Page 72)

Finding A Location Using The Map
1. From the main menu, press Where To? > Browse Map.
2. Press a location.
An information box appears next to the location.
3. Press the information box.
4. Select an option:
• Press > Save .
5. Press Go!.
Setting A Simulated Location
You can use the GPS simulator to select another location,
near which you can search for and save points of interest.
This may be helpful when planning trips.
1. From the main menu, press Tools > Settings > System
> GPS Simulator > On .
2. From the main menu, press Where To? > Browse Map.
3. Press an area on the map.
4. Press > Set Location .
Entering Coordinates
If you know the geographic coordinates of your destina-
tion, you can use your navigation system to navigate to
the destination using the latitude and longitude coordi-
nates.
1. From the main menu, touch Where To? > Coordinates.
2. Touch a field to enter the latitude and longitude data.
3. Touch View on Map.
4. Touch Go!.
8
NAVIGATION (8.4N ONLY) 71