Changing the map coordinate format, Speaking commands, About voice commands – Chrysler 2014 300 SRT - Uconnect 4.3/8.4 Manual User Manual
Page 73: Activating voice command, About icons and tones
Changing The Map Coordinate Format
1. From the Home Screen, press Where To? > Coordi-
nates >
> Format
.
2. Select a format.
Speaking Commands
About Voice Commands
NOTE:
The voice command feature is not available for
all languages or regions.
The voice commands allow you to use your navigation
system by speaking the words you see on the screen or by
speaking certain commands.
Activating Voice Command
• Press the Voice command button.
• The navigation system enters voice command.
About Icons and Tones
• The navigation system sounds two tones when it
enters and exits voice recognition mode.
• A
red icon appears in the upper-right corner of the
screen when the navigation system is not ready for
your command.
• Wait until the
icon is green to speak your command.
72
NAVIGATION (8.4N ONLY)