CompuSTAR P1WAMR - Manual (Page 12)

Remote Coding / Programming Routine(s) Remote Coding / Programming Routine(s)
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any
operations. All remotes must be coded at the same time.
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any
operations. All remotes must be coded at the same time.
Programming Your Remotes Programming Your Remotes
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the
Acc & On positions) five times within 7 seconds. The vehicle’s parking lights will flash once with the
successful completion of this step.
STEP 2: Within a 5 second period after cycling the ignition for the 5
th time, press button (I) on two-way
remotes or the Lock button on one-way remotes for 0.5 seconds. The parking lights will flash once to
confirm the transmitter has been coded.
Exiting Programming: Programming is a timed sequence. The parking
lights will flash twice signaling the end of programming mode.
Programming Multiple Remotes: After the confirmation flash given in
step 2, code additional remotes by pressing button (I) on two-way
remotes or the Lock button on one-way remotes. The parking lights
will flash once confirming each additional remote. All systems can
recognize up to three remotes.
12