Canon IMAGE FORMULA DR-9050C - Manual (Page 30)

22
4. Unlock the left document guide.
Preparing the Document Eject Tray
The Eject Tray includes two Document Eject Guides, the
Eject Tray Extension and Eject Paper Stopper, to be adjusted
to fit the width and length of your documents.
■ Document Guides
Slide the document eject guides to fit the width of your
documents.
The eject position of the document can be checked by
feeding a single sheet of the document in Count-Only
Mode. For details on the Count-Only mode, refer to the
User Manual.
■ Document Eject Tray Extension
Open the Document Eject Tray Extension when
documents look like they are going to fall off of the eject
tray.
■ Eject Paper Stoppers
Raise the appropriate Eject Paper Stoppers to stop ejected
documents from spilling out of the eject tray.
Hint
The eject paper stoppers are attached to the document eject
tray extension, so you can adjust their positions to suit your
document length.
When an LTR/A4-size paper is loaded, close the document
eject tray extension and stand up the upper eject paper
stoppers. When an A3-size paper is loaded, open the document
eject tray extension and stand up the upper eject paper
stoppers.