Trimming settings – Canon HG20 User Manual

Page 73

Advertising
background image

73

Canon's PictBridge-compatible printers: If

printing does not resume automatically
after you solved the problem, select
[Continue] and press

to resume

printing. If that option is not available,
select [Stop] and press

and

then

restart printing from the beginning.

Other printers or if the error still persists with

a Canon printer: If printing does not
resume automatically, disconnect the
USB cable and turn off the camcorder.
After a short while, turn on the
camcorder and restore the USB
connection.

IMPORTANT

• You may not be able to print correctly

with a PictBridge-compatible printer
photos whose file names have been
changed or that were recorded, created,
edited or changed with any device other
than this camcorder.

• If [Busy] does not disappear, disconnect

the USB cable and restore the
connection after a short while.

Trimming Settings

Set the paper size and page layout
before changing the trimming settings.
Trimming settings apply to one photo
only.

1

Open the print settings menu.

Refer to steps 1-2 in Printing after
Changing the Print Settings
(

71).

2

Select (

,

) [Trimming] and

press .

The trimming frame appears.

3

Change the size of the trimming
frame.

• Move the zoom lever toward T to

shrink the frame, and move it
toward W to enlarge it. Press

to change the orientation of the
frame (portrait/landscape).

• To cancel the trimming settings,

move the zoom lever toward W
until the trimming frame
disappears.

4

Move (

,

) the trimming

frame to the area you want to
print.

5

Press

to return to the print

settings menu.

• The print area selected will be

indicated by a green frame within
the thumbnail.

• To change other print settings and

print the area you selected refer to
steps 3-5 in Printing after
Changing the Print Settings

(

71).

FUNC.

Advertising
This manual is related to the following products: