Canon CB-2LTE - Manual (Page 3)

Important Usage Instructions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
in these safety instructions the word “product” refers to the Canon Battery Charger CB-2LT.
Read Instructions -
operated.
Retain Instructions
reference.
Heed Warnings —
adhered to.
— All the safety and operating instructions should be read before the product is
— The safety and operating instructions should be retained for future
All warnings on the product and in the operating instructions should be
4. Follow Instructions — All operating and maintenance instructions should be followed.
5. Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. The product should be cleaned only as recommended in this manual.
6. Accessories — Do not use accessories not recommended in this manual as they may be
hazardous.
7. Avoid magnetic or electric fields — Do not use the camera close to TV transmitters, portable
communication devices or other sources of electric or magnetic radiation. They may cause picture
interference, or permanently damage the camera.
8. W ater and Moisture — Hazard of elecfric shock — Do not use this product near water or in
rainy/moist situations.
9. Placing or Moving — Do not place on an unstable cart, stand, tripod, bracket or table.
The product may fall, causing serious injury to a child or adult, and serious damage to
the product.
A product and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the product and cart combination to overturn.
10. Power Sources — The product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. Regarding other power sources such as
battery power, refer to instructions in this manual.
11. Lightning — For added protection of this product during a lightning storm, or when it is left
unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect
the antenna. This will prevent damage to the product due to lightning and power-line surges.
12. Overloading — Do not overload wall outlets and extension cords as this can result in a risk
of fire or electric shock.
13. Objects and Liquid Entry — Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short out parts that could result in a fire
or electric shock. Be careful not to spill liquid of any kind onto the product.
14. Servicing — Do not attempt to service this product yourself as opening or removing covers
may expose you fo dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
15. Damage Requiring Service — Disconnect this product from the wall outlet and all power
sources including battery, and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto, or objects have fallen into, the product.
c. If the product has been exposed to ram or water.
d. If the product does not operate normally even if you follow the operating instructions. Adjust only those controls that are covered
by the operation instructions. Improper adjustment of other controls may result in damage and will often require extensive work by
a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance. This indicates a need for service.
16. Replacement Parts — W hen replacement parts are required, be sure the service technician
has used replacement parts that are specified by Canon or that have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
17 Safety Check — Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in safe operating order.
This product is not intended to be serviced. Should the product cease to function in its intended manner, it should be returned to the manufacturer or be discarded.