Four-wheel drive operation - if equipped, Driving on slippery surfaces, Acceleration – Jeep 2009 Patriot - Owner Manual User Manual

Page 268: Four-wheel drive operation — if equipped

Advertising
background image

FOUR-WHEEL DRIVE OPERATION — IF
EQUIPPED

This feature provides full time, on-demand, four–wheel
drive (4WD).

Where one or more wheels have wheel spin or if addi-
tional traction is needed in sand, deep snow, or loose

traction surfaces, activate the 4WD LOCK switch by
pulling up once and releasing. This locks the center
coupling allowing more torque to be sent to the rear
wheels. The 4WD Indicator Light will come on in the
cluster. This can be done on the fly, at any vehicle speed.
To deactivate, simply pull on the switch one more time.
The 4WD Indicator Light will then go out.

NOTE:

Refer to Electronic Stability Program (ESP) in the

“Electronic Brake Control System” section of this manual
for additional information.

DRIVING ON SLIPPERY SURFACES

Acceleration

Rapid acceleration on snow covered, wet, or other slip-
pery surfaces may cause the front wheels to pull errati-
cally to the right or left. This phenomenon occurs when
there is a difference in the surface traction under the front
(driving) wheels.

Four-Wheel Drive Switch

266

STARTING AND OPERATING

Advertising
This manual is related to the following products: