Replacement keys, Customer key programming – Jeep 2010 Commander - Owner Manual User Manual

Page 18

Advertising
background image

NOTE:

The Sentry Key

௡ Immobilizer system is not

compatible with aftermarket remote starting systems.
Use of these systems may result in vehicle starting
problems and loss of security protection.

All of the RKE transmitters provided with your new
vehicle have been programmed to the vehicle electronics.

Replacement Keys

NOTE:

Only RKE transmitters that are programmed to

the vehicle electronics can be used to start and operate
the vehicle. Once an RKE transmitter is programmed to a
vehicle, it cannot be programmed to any other vehicle.

CAUTION!

Always remove the keys from the vehicle and lock all
doors when leaving the vehicle unattended.

At the time of purchase, the original owner is provided
with a four-digit Personal Identification Number (PIN).
Keep the PIN in a secure location. This number is
required for authorized dealer replacement of RKE trans-
mitters. Duplication of RKE transmitters may be per-
formed at an authorized dealer, this procedure consists of
programming a blank transmitter to the vehicle electron-
ics. A blank transmitter is one that has never been
programmed.

NOTE:

When having the Sentry Key

௡ Immobilizer

system serviced, bring all vehicle RKE transmitters with
you to the authorized dealer.

Customer Key Programming

Programming of RKE transmitters may be performed at
an authorized dealer.

18

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: