To turn off flash lights with lock – Jeep 2012 Wrangler Unlimited - Owner Manual User Manual

Page 26

Advertising
background image

the headlights will turn on, the park lights will flash, the
horn will pulse on and off and the interior lights will turn
on.

The Panic Alarm will stay on for three minutes unless
you turn it off by pressing the PANIC button a second
time, or if the vehicle speed is 5 mph (8 km/h) or greater.

NOTE:

When you turn off the Panic Alarm by pressing

the PANIC button a second time, you may have to move
closer to the vehicle due to the radio frequency noises of
the system.

To Turn Off Flash Lights With Lock

This feature will cause the turn signal lights to flash when
the doors are locked or unlocked with the RKE transmit-
ter. This feature can be turned on or turned off. To change
the current setting, proceed as follows:

• For vehicles equipped with the EVIC, refer to “Elec-

tronic Vehicle Information Center (EVIC)/Personal

Settings (Customer-Programmable Features)” in “Un-
derstanding Your Instrument Panel” for further infor-
mation.

• For vehicles not equipped with the EVIC, perform the

following steps:

1. Press the RKE transmitter UNLOCK button for 4 to
10 seconds.

2. While the UNLOCK button is pressed, (after four
seconds) press the RKE transmitter LOCK button. Re-
lease both buttons.

3. Test the “Flash Lights With Lock” feature outside of
the vehicle by pressing the RKE transmitter LOCK button
with the ignition in the LOCK position and the key
removed.

NOTE:

Pressing the RKE transmitter LOCK button

while you are in the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security

24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: