Universal Remote Control (URS) CAM-DC-O - Manual (Page 7)

Page 4
CAM-DC-O V
ANDAL AND
W
EATHERPROOF
N
ETWORK
C
AMERA
Basic Installation
Follow these basic steps to install the Vandal and
Weatherproof Network Camera CAM-DC-O.
1. Fasten the camera to your planned location.
2. Plug an ethernet cable to the LAN port of the camera.
Note: No separate power supply is needed as the camera
receives power via a PoE supply or a MFSPOE-8 router.