Universal Remote Control (URS) Thermo Control - Manual (Page 5)

Thermo Control for THZ-100 Thermostat
3
2.0 programming the Thermo Control THZ-100 Thermostat software
2.1 Using Thermo Control
as the software opens, a small window titled, “Select a Device” prompts you to do just that.
1. Choose your installed MrX advanced network system Controller (Base station), from the item
list. (ex. MrX-10)
Note: Now that you have selected your base station, the next time you open the software it will
remember your selection. Since the thermostat’s configuration is stored in the MRX unit,
Thermo Control will automatically upload the configuration for each connected thermostat.
2. Click the Refresh button to discover the connected base station. The base stations’s
Description, MAC and IP address populate.
3. Highlight the correct base station and press OK.
4. The “Select a device” window closes and uploads the thermostat’s configuration.
Thermo Control for THZ-100 Thermostat