Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 133
Connex CS Admin Guide
Troubleshooting
127
Hardware Connex Server Computer Front Panel LED
information
The server included LEDs on the front panel that can aid in troubleshooting the system.
I/O errors
2E0h
ERR_IO_ADDRESS
2E1h
ERR_IO_COM
2E2h
ERR_IO_LPT
2E3h
ERR_IO_CONFLICT
2E4h
ERR_IO_UNSUPPORTED
2E5h
ERR_IO_IRQ
2E6h
ERR_IO_IDE
2E7h
ERR_IO_FDD
2F0h
ERR_IO_CPUID
2F1h
ERR_IO_BIST
2F2h
ERR_IO_BSP
2F3h
ERR_IO_AP
2F4h
ERR_IO_CMOS
2F5h
ERR_IO_DMA
2F6h
ERR_IO_NMI
2F7h
ERR_IO_FAILSAFE
Class
Number
Name
LED Name
Function
LED Color
Notes
ID
Aid in server identification
from the back panel.
Blue
Press ID LED button or use Server
Management SW to turn the LED on and
off.
System Fault
Visible fault warming
Green or
Amber
On = No Fault
Green Blink = degraded
Amber = non-critical
Disk Activity
Display disk activity
Green
Up to 4 disk activity LEDs, one per bay.
Blinking = activity, no action required.
Off = no activity or disk not installed.
Power LED
Identify the power state of the
system
Green
Off = power is off
On = power is on
Slow blink = low power state