Waveform display – Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual User Manual
Page 32
28
Operation
Welch Allyn 1500 Patient Monitor
Waveform display
The waveforms that can be configured are as follows:
•
RESP in waveform 2 can only be displayed when etCO
2
is not enabled.
•
When ST is enabled SpO
2
is available for waveform 4 only. When ST is not enabled
SpO
2
is available for waveform 3 only.
•
When resting ECG is enabled, ECG waveform can also be set in waveform 4.
•
Waveforms P1, P2, P3, P4 are displayed when selected in the parameter
measurements fields and shown in waveform fields 4, 5, 6 and 7 or 5, 6, 7 and 8 only.
•
The size of the waveforms are automatically adjusted for the number of waveforms
displayed.
Waveform
position
ECG
RESP
CO2
Trend
ST
SpO2
P1
P2
P3
P4
1
•
2
•
•
•
•
•
3
•
•
•
•
•
4
•
•
•
•
5
•
•
6
•
•
7
•
•
8
•
Waveform 1 - ECG (I, II, III, V, aVL,
aVR, aVF)
Waveform 2 - ECG, RESP, CO
2
, ST
or Trend (
)
Waveform 3 - ECG, RESP, Trend,
CO
2
, or SpO2
(Waveform 4- ECG, Trend, or SpO
2
)
Waveform 4 to 7 (5 to 8) - P1 to P4,
or P1 and P2, or no IBP waveform
displayed. P1, P2, P3, P4 will be
displayed as selected for
parameter measurement (see