Canon IMAGECLASS D460 - Manual (Page 48)

D
ocumen
ts and P
rin
t M
edia
2-11
Loading Paper
6
Load the paper into the paper feeding
tray with the print side up. Make sure the
paper stack sits below the hook (A) on the
side paper guide.
7
Adjust the paper guide rail to match the
size of paper.
8
Aligning the protrusions (A) on both sides
of the dust cover to the guides (B) inside
the machine, set the dust cover.
In the Multi-Purpose Tray
Use the multi-purpose tray when you want to copy
or print on the different paper which is in the paper
cassette. Load paper one by one in the multi-
purpose tray.
The paper in the multi-purpose tray is fed prior to the paper in
the paper cassette.
The recommended envelopes are COM10 (#10), MONARCH,
DL, and ISOC5. Using other envelopes may affect the quality
of the printout.
Make sure to set the correct paper size in the printer driver.
When printing the USER DATA LIST, paper can be fed only
from the paper cassette. If paper is loaded into the multi-
purpose tray, <REMOVE MP PAPER> appears.
For D460
1
Spread the paper guides a little wider
than the actual paper width.
–
–
–
–
●