CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch - Manual (Page 80)

6-4
6.3 Indicators
Port:
100BASE-TX:
Transmit (Tx)
Link (Lnk)
Collision (Col)
Half / Full-duplex (Fdx)
Receive (Rx)
Auto (Aut)
Partition (Par)
10/100 transmission rate
100BASE-FX:
Transmit (Tx)
(SMF, MMF) Link (Lnk)
Collision (Col)
Half / Full-duplex (Fdx)
Receive (Rx)
Remote Fault (Rmtf)
Partition (Par)
Link Loss Forwarding / Enabled (Llf)
10BASE-FL:
Transmit (Tx)
(MMF, SMF) Link (Lnk)
Collision (Col)
Receive (Rx)
Half / Full-duplex (Fdx)
Partition (Par)
AUI:
Collision (Col)
Partition (Par)
General:
Mgr Module
Power
Mgr Activity
Fault (Flt)
6.4 Alarms
General:
Per port relay activated by:
Unit Power Fail
Link Loss (except AUI interface)
Remote Fault (100BASEFX and managed only)
Relay Per Port:
Three dry contacts (common, normally open, normally closed) located on the
rear panel.
Contact current: 300mA 125 VAC / 30 VDC Max.
Screw-terminal strips
Deleted: ¶
Deleted: ¶
Deleted: ¶