CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch - Manual (Page 94)

B-10
In the "Connect" drop-down menu, select "Remote System." The "Connect" screen will appear as
shown in figure B-15. Enter the SLIP IP address of the remote 9135 or 9140 under "Host Name."
Verify that the "Port," and "TermType" settings match the settings shown in Figure B-15.
Figure B-15. Connec ting Telnet Session via MSDOS.
Click the "Connect" button. A successful SLIP connection is shown in Figure B-16.
Figure B-16. Successful Telnet Session.
Deleted: ¶
¶
¶
Deleted: ¶