Engine - fuel & air filter – Countax D50 User Manual

Page 21

Advertising
background image

Page 21

Engine - Fuel & Air Filter

FUEL FILTER

Replace the fuel filter after 400 hours of use or annually
(Part No. 1182005510). Follow this procedure:
• Loosen the inlet and outlet port clip of filter and remove pipe.
• Remove the fuel filter by pulling it towards you.
• Install a new fuel filter to the support.
• Attach the inlet/outlet pipe to the fuel filter.

AIR BLEEDING FROM FUEL SYSTEM

By starting your D18/50 the solenoid pump is actuated to bleed
air automatically from the fuel system.

AIR CLEANER ELEMENT CLEANING AND

REPLACEMENT

Clean the air cleaner element once every 50 hours and replace it
every 200 hours.

1. Remove the air cleaner cover and element.
2. Blow the element with compressed air (7kg/cm or below) to

remove dust.

3. Clean inside the case any dust and dirt and install the element.
4. Always ensure that seal is in place.

Always replace excessively used or damaged filter elements
Part No. 11840012520.

BONNET AIR VENTS

It is very important to regularly check and clean the side air vents
located on either side of the bonnet of your D18/50 tractor.

RADIATOR GRILL

Check and clean on every refuelling, see fig 4.

fig 1

Keep

clear of dirt

fig 3

fig 2

Removal of

Air filter

Fuel

Filter

fig 4

Clean the radiator

grill using a soft

brush, taking care

not to damage the

radiator

Remove the

guard on radiator by

loosening the 3

screws using a
10mm spanner

Air cleaner

cover

Prefilter

Filter

element

Seal

Advertising
This manual is related to the following products:

D18