Local management, 1 overview, Chapter 5 – Cabletron Systems 2E43-51R User Manual
Page 49: Overview -1, Refer to, For information on how to, Er to, Chapter 5 local management
2E43-51/2E43-51R User’s Guide
5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
Local Management. It also explains how to use the Local Management
screens and commands.
5.1
OVERVIEW
Local Management for the 2E43-51 consists of a series of screens that
allow the management of the 2E43-51 and its attached segments. The
screens allow the user to do the following tasks:
•
Assign IP address and subnet mask
•
Select a default gateway
•
Control access by establishing community names
•
Download a new operation software image
•
Designate which Network Management Workstations receive SNMP
traps from the device
•
View statistics
•
Configure ports
•
Control the number of receive broadcasts that are switched out to the
other interfaces
•
Clear NVRAM
There are three ways to access Local Management:
•
Locally using a VT type terminal connected to the COM port
•
Remotely using a VT type terminal connected through a modem
•
In-band through a Telnet connection