Char-Broil 11601695-A1 - Manual (Page 6)

ASSEMBLY
6
ASSEMBLY GUIDE
Part Qty.
B1 – Lower Body 1
B2 – Wind Shield 1
B3 – Grill Lid 1
GRILL BODY Assembly
Step 1
- Attach the Lower Body Assembly (B1) to the
Cart Assembly by aligning the studs on the bottom of the
grill with the corresponding holes in the tops of the leg
assemblies. Secure with 7 each 10-24 nuts. A Nut Driver
(not supplied) will work nicely for this step.
Step 4 -
Attach the Grill Lid (B3) by aligning the hinge holes
in the lid to the matching holes in the Wind Shield (B2). Insert 2
Hinge Screws into the holes and secure with 2 1/4-20 nuts and
two Fiber washers from the inside of the grill.
10-24
Nuts
(3 each)
10-24x3/8"
Screws
(3 each)
Fiber
Washer
(3 each)
Step 3 -
Attach the Wind Shield (B2) to the Lower Body (B1)
by aligning the holes in the panels with the corresponding holes in
the Lower Body. Secure with 3 10-24 nuts, 3 10-24x3/8" Screws,
and 3 fiber washers. The Wind Shield will rest inside the Lower
Body.
B2
B1
B3
B1
Studs
located on
Lower
Body
Assembly
Fiber
Washer
(2 each)
(qty 5)
Fiber Washer
(qty 10)
Fasteners
10-24x3/8"
(qty 3)
screw
10-24 Nut
(qty 2)
Hinge
(qty 2)
1/4-20 Nut
screw
Hinge
Screws
(2 each)
1/4-20x3/4"
1/4-20
Nuts
(2 each)
1/4-20x3/4"
Step 2
- With the legs assembled to the Lower
Body, tighten the 4 screws holding the Cart
Bracket in place. Once complete, turn the grill over
to the upright position.
Visit www.sizzleonthegrill.com/user-forums to chat with Patio Bistro® owners just like you!
B1
Cart
Bracket