Char-Broil 11601695-A1 - Manual (Page 7)

7
ASSEMBLY GUIDE
GRILL FINAL Assembly
Part Qty.
C1 – 1
C2 –
Cooking Grate
1
C3 –
Warming Rack
1 Grease tray
C2
C3
Step 1
- With the Grill Lid open, place the Cooking Grate (C1)into the Lower Body, allowing it to rest on the three brackets
spaced around the Lower Body. Be sure the slots in the Cooking Grate are facing the front of thegrill. Place the Warming Rack
(C2) into position by first hooking the center pins into the wind shield, then rotate the warming rack down into position.
Step 2
- Install the Grease Tray (C3) by sliding the tray onto the Grease Tray Rails from the rear of the grill. Note: The
grease tray rests between the grease tray rail stops. See detail shown in Figure A.
NOTE: The Cooking Grate may
have sharp edges. Be very careful
when handling the Cooking Grate.
You should wear gloves when
handling the Cooking Grate.
Grease
Tray
Rails
C1
Slots to
the front
of the grill.
Visit www.sizzleonthegrill.com/user-forums to chat with Patio Bistro® owners just like you!
Grease
Tray
Rail Stops
Fig. A