Chamberlain 3130M 1/3 HP - Manual (Page 5)

5
UP
CEILING MOUNT ONL
Y
Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model purchased. If anything is missing, carefully check the packing
material. Parts may be stuck in the foam. Hardware for
installation is also listed below.
Carton Inventory
RAIL ASSEMBLY
Coupling Sleeve (1)
Hex Bolt 1/4"-20 x 5/8" (4)
Nut 1/4" - 20 (4)
INSTALLATION HARDWARE
Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Insulated Staples
Ring Fastener (3)
Drywall Anchors (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Rope
Handle
SECURITY✚ ®
1-Button Remote Control
SECURITY✚ ®
3-Button Remote Control
Model 3130M (1) Model 3240M (1)
Model 3240M Model 3130M
Multi-Function Door
Control Panel
Remote Control
Visor Clip
Motor Unit with Light Lens
Model 3130M
Motor Unit with 2 Light Lenses
Model 3240M
Door Bracket
Header Bracket
Curved Door
Arm Section
2 Conductor Bell Wire
White & White/Red
Trolley
Rail
Sprocket Coupling
Lighted Door
Control Button
Safety Labels
and Literature
Straight Door
Arm Section The Protector System ®
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving
Eye) with 2-Conductor White &
White/Black Bell Wire attached
Safety Reversing
Sensor Brackets (2)