Use a null-modem cable to connect the ses1-eia, Use a serial-to-parallel cable to connect the p, Verify that the driver has been installed with – Comtrol SCO OpenServer User Manual

Page 31: Disable /dev/ttyr0a, Edit /comtrol/rckt/tprint.cfg and add the follo, Run /comtrol/rckt/psetup -t, Run /comtrol/rckt/psetup, Enable /dev/ttyr0a, Enter this command, Login on the terminal and cat files to the pri

Advertising
Use a null-modem cable to connect the ses1-eia, Use a serial-to-parallel cable to connect the p, Verify that the driver has been installed with | Disable /dev/ttyr0a, Edit /comtrol/rckt/tprint.cfg and add the follo, Run /comtrol/rckt/psetup -t, Run /comtrol/rckt/psetup, Enable /dev/ttyr0a, Enter this command, Login on the terminal and cat files to the pri | Comtrol SCO OpenServer User Manual | Page 31 / 42 Use a null-modem cable to connect the ses1-eia, Use a serial-to-parallel cable to connect the p, Verify that the driver has been installed with | Disable /dev/ttyr0a, Edit /comtrol/rckt/tprint.cfg and add the follo, Run /comtrol/rckt/psetup -t, Run /comtrol/rckt/psetup, Enable /dev/ttyr0a, Enter this command, Login on the terminal and cat files to the pri | Comtrol SCO OpenServer User Manual | Page 31 / 42
Advertising
See also other documents in the category Comtrol Software: