Casio XJ-A130 User Manual

Page 23

Advertising
background image

23

To turn password protection on and off

1.

Display the Power On Password setting screen by performing steps 1 through 5
of the procedure under “To change the password” on pag
e 22.

 At this time, make sure that “Power On Password” is selected on the Power On Password

setting screen.

2.

Use the [

] and [] keys to select “On” or “Off”.

 Changing the power on password setting from “Off” to “On” causes the confirmation dialog

box shown below to appear.

Press the [ENTER] key to confirm that you want to turn on power on password protection, or
[ESC] to exit the dialog box without doing anything.

3.

After you are finished, press the [MENU] key to exit the setup menu.

Entering the Password when Turning On the Projector

When you turn on the projector while password protection is turned on will cause a password input
dialog box to appear on the projection screen. All projector operations will be accessible to you after
you input the correct password and press the [ENTER] key.

Note

You can perform the projection size adjustment operation ([ZOOM +] / [ZOOM –] keys), focus
operation ([FOCUS ] / [FOCUS ] keys), and power off operation ([P] (Power) key) while the
password input dialog box is on the projection screen.

Advertising
This manual is related to the following products: