Operational info main menu, Restore all defaults main menu – Casio XJ-A130 User Manual
Page 35
35
Operational Info Main Menu
Restore All Defaults Main Menu
Setting Name
Input
Setting Unit
Description
Input Signal
R C V H D W U N Source
Specific
This sub-menu item shows the currently selected input signal
(RGB, Component, VIDEO, HDMI (PC), or HDMI (DTV)). “- - - -” is
indicated here when there is no input signal.
Signal Name
R C V H D W U
Source
Specific
This sub-menu item shows the signal name of the signal being
input to the projector. For details about signal names, see “Signal
Name” under “Supported Signals” on page 48.
Resolution
R
H
Source
Specific
This sub-menu item appears only when RGB is the input signal. It
shows the number of vertical and horizontal pixels of resolution of
the RGB or HDMI (PC) input signal.
Horizontal
Frequency
R C V H D
Source
Specific
This sub-menu item shows the horizontal frequency of the input
signal.
Vertical
Frequency
R C V H D
Source
Specific
This sub-menu item shows the vertical frequency of the input
signal.
Scan System
R C
H D
Source
Specific
This sub-menu item appears only when RGB, Component,
HDMI (PC), or HDMI (DTV) is the input signal, and shows the scan
system of the input signal. The scan system is interlace or non-
interlace for an RGB or HDMI (PC) signal input, and interlace or
progressive for a component or HDMI (DTV) signal input.
Lamp Time
R C V H D W U N Single
This sub-menu item shows the cumulative number of hours the
current lamp has been used to date.
Setting Name
Input
Setting Unit
Description
Unit Operating
Time
R C V H D W U N Single
This sub-menu item shows the cumulative operating time of this
unit. This time cannot be initialized.
Restore All
Defaults
R C V H D W U N Single
This sub-menu returns all sub-menu items on all main menus to
their initial default settings. This operation can be performed
regardless of the currently selected input source and regardless
of whether or not a signal is currently being input. For details
about this procedure, see “To restore all settings on the setup
menu to their initial factory defaults” on page 25.