Flash-to-pass, Windshield wipers, Flash-to-pass -9 windshield wipers -9 – Cadillac 2009 CTS User Manual

Page 155

Advertising
background image

Flash-to-Pass

This feature allows the high-beam headlamps to be
used to signal the driver in front of you that you
want to pass.

Pull and hold the turn signal/multifunction lever toward
you to use this feature. When this is done the following
will occur:

•

If the headlamps are off, in low-beam or in
Daytime Running Lamps (DRL) mode, the
high-beam headlamps will turn on. They will
stay on as long as the lever is held there.
Release the lever to turn them off.

•

For vehicles with High Intensity Discharge (HID)
headlamps, the low-beam headlamps must be on
to activate the high-beam headlamps. See High
Intensity Discharge (HID) Lighting
on page 5-58.

•

If the headlamps are already in high-beam mode,
they will remain on high-beam.

Windshield Wipers

The lever on the right side of the steering column
operates the windshield wipers.

Move the lever to one of the following positions:

7

(Mist): Pull the lever down and release it for a

single wiping cycle. The lever will return to its original
position. Hold the lever in this position for continuous
wiping cycles.

&

(Delay): For a delayed wiping cycle. Turn the delay

adjustment band to set the length of the delay.

3-9

Advertising
This manual is related to the following products: