KERN & SOHN AEJ 100-4NM - Manual (Page 62)

62 AEJ_N/AES_N-BA-e-1321
13.3.2 Numeric entry of reference weight (function F4 Prcb)

Enter percentage of your choice, using cursor keys.

Select the digit to be change by pressing the F-key; each time the currently
active digit will be blinking.

Select the digit by pressing the UNIT key

Confirm by pressing the PRINT key
From now on the weight of the load will be shown in percent based on the reference
weight.
Display for entering reference (= 100%)
appears.