Adjustment items 19" model, English – Compaq P1210 User Manual
Page 16
- 5 -
ENGLISH
CONTRAST
Adjusts the contrast level.
X
X
BRIGHT
Adjusts the black level of the screen
X
X
COLOR TEMPERATURE
Adjusts the color temperature of the image on the screen.
X
X
HORIZ-SIZE
Adjusts the horizontal size of the image on the screen.
X
HORIZ-PHASE
Adjusts the horizontal position of the image on the screen.
X
VERT-SIZE
Adjusts the vertical size of the image on the screen.
X
VERT-POSITION
Adjusts the vertical position of the image on the screen.
X
PINCUSHION
Straightens the left and right sides of the image on the screen.
X
KEYSTONE
Adjusts the parallelism of the left and right sides of the image on the screen.
X
TOP-PIN
Adjusts the pincushioning at the top corners of the screen.
X
BOTTOM-PIN
Adjusts the pincushioning at the bottom corners of the screen.
X
PIN-BALANCE
Adjusts the curvature of the left and right sides of the image on the screen.
X
KEY-BALANCE
Adjusts the vertical slant or tilt of the screen image.
X
ROTATION
Adjusts the rotation of the image on the screen.
X
GEOMETRY RESET
Restores to the factory preset level.(See "NOTE" below.)
-
-
-
HORIZ-STATIC
Adjusts the horizontal alignment of the red, green and blue beams.
X
X
VERT-STATIC
Adjusts the vertical alignment of the red green and blue beams.
X
X
MOIRE CANCEL LEVEL
Adjusts the moire level on the screen.
X
CORNER PURITY (TL)
Adjusts the purity of the top-left corners of the screen.
X
X
CORNER PURITY (TR)
Adjusts the purity of the top-right corners of the screen.
X
X
CORNER PURITY (BL)
Adjusts the purity of the bottom-left corners of the screen.
X
X
CORNER PURITY (BR)
Adjusts the purity of the bottom-right of the screen.
X
X
CLAMP PULSE POSITION
Uses this function to eliminate excessive green or white background that may occur
when external sync signals are applied to the monitor.
VIDEO LEVEL
Selects video level 1.0V or 0.7V. (0.7V Standard)
DEGAUSS
Eliminates possible color shading or impurity.
-
-
-
POWER-SAVE
When setting to ON, the power consumption of the monitor will be reduced when not in use
X
if your computer is set for power management.
CONTROL LOCK
Locks the OSD function except for "BRIGHT" and "CONTRAST".
X
OSD POSITION
Moves the OSD screen position.
X
DIAGNOSIS
Indicates the current scanning frequency, factory or user preset timing number, and
-
-
-
signal input connector.
LANGUAGE
Selects the language used on OSD screen.
X
A. Press "GEOMETRY RESET" to restore to the factory preset level.
B. Press - and + buttons together, to restore to the factory preset level.
C. Set data does not change by the change of the signal timing.
If a non-Factory Preset timing is used, "GEOMETRY RESET" does not work.
X = Available
Items
Function
A B C
Adjustment Items
19" Model
N O T E