Auto unlock doors on exit, Auto door lock, Sound horn with lock – Dodge 2010 Dakota User Manual

Page 18: Flashing lights with lock, Getting started

Advertising
background image

Auto Unlock Doors On Exit

• To have all of the vehicle doors unlock when any door is opened:

• Enter your vehicle and close all the doors.

• Fasten your seatbelt.

• Within 15 seconds, cycle the ignition switch between LOCK and ON and then back to

LOCK four times, ending up in the LOCK position (do not start the engine).

• Press the power door UNLOCK switch to unlock the doors. A single chime will

indicate that programming is complete.

Auto Door Lock

• To have the doors lock automatically when the vehicle’s speed exceeds 15 mph

(24 km/h):

• Enter your vehicle and close all the doors.

• Fasten your seatbelt.

• Within 10 seconds, cycle the ignition switch between LOCK and ON and then back

to LOCK four times, ending up in the LOCK position (do not start the engine).

• Press the power door LOCK switch to lock the doors. A single chime will indicate

that programming is complete.

Sound Horn With Lock

• To turn the horn chirp on or off when the doors are locked:

• Press the LOCK button for at least 4 seconds, but no longer than 6 seconds. Then,

press the PANIC button while still holding the LOCK button. A single chime will
sound to indicate that this feature has changed.

• Release both buttons at the same time.

Flashing Lights With Lock

• The turn signal lights flashing, when the doors are locked or unlocked, feature can be

turned on or off. To turn this feature on or off:

• Press and hold the UNLOCK button for at least 4 seconds, but no longer than

6 seconds. Then, press and hold the LOCK button while still holding the UNLOCK
button. A single chime will sound to indicate that this feature has changed.

• Release both buttons at the same time.

GETTING STARTED

16

Advertising