Local management, 1 management terminal requirements, Chapter 4 local management – Cabletron Systems MicroMMAC 24T MICROMMAC- User Manual
Page 55
4-1
CHAPTER 4
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal and a modem
to access MicroMMAC-T’s Local Management (LM). It also explains how
to use Local Management tools to manage the MicroMMAC-T, its
components, and its attached segments (i.e., BRIMs, MicroSNAC).
Use Local Management to Do the Following:
•
Control password access to the MicroMMAC-T
•
Change factory defaults
•
Enable and disable ports
•
Ensure ring security by controlling access to the Token Ring network
•
Assign an IP address and subnet mask
•
Set interface parameters for serial ports, Local Management (LM),
Serial Line Internet Protocol (SLIP), Uninterrupted Power Supply
(UPS), and Telnet
•
Designate which Network Management Stations (NMS) receive traps
from the device
•
Navigate through the Management Information Base (MIB) and
manage the objects within it
4.1 MANAGEMENT TERMINAL REQUIREMENTS
To access Local Management, use one of the following management
terminals:
•
Digital Equipment Corporation VT series terminal
•
VT type terminal running emulation programs for the Digital
Equipment Corporation VT series
•
IBM or compatible PC running a VT series emulation software
package