Compaq 5532 - Manual (Page 87)

Proprinter XL Emulation
87
Proprinter XL Emulation
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled,
each time the printer receives a Carriage Return, it inserts an additional
Line Feed code (hex 0A) into the data stream. Do not use this feature if
the host computer sends Line Feeds to the printer.
• CR = CR. Does not insert an extra Line Feed after each Carriage
Return.
• CR = CR + LF. Inserts an extra Line Feed after each Carriage
Return.
Printer
Protocol
(from page 79 )
Define CR
Code
Auto LF Define LF
Code
FF Valid at
TOF
Character Set Alt. Char Set
20 CPI
Condensed
CR = CR*
CR = CR + LF Enable*
Disable LF = LF*
LF = CR + LF Enable*
Disable Code Page 437*
Code Page 850
OCR-A
OCR-B
Latin 2 8859-2
Latin 2 852
Bulgarian
Latin 0 8859-15 Set 1*
Set 2
Enable*
Disable
* = Factory Default
Proprinter XL