System requirements, Installing services manager, Establishing the connection between the – Canon 220EP User Manual
Page 22: Device and sharescan services manager, System requirements installing services manager
18
7.
Establishing the Connection between the Device and ShareScan Services
Manager
In order to use the device, you must first install ShareScan Services Manager on a computer that is connected to the same network
as the device.
This section describes the procedure for installing Services Manager on the computer and establishing a connection with the device.
This section also describes how to install Quick Connect.
❏ System Requirements
The minimum requirements for installing ShareScan
Service Manager on your computer are as follows.
CPU
Intel Pentium 4 2.4GHz or higher
RAM
512MB or higher (1GB or higher is recommended)
Operating System
Micorosoft Windows XP Professional SP3 or later
Microsoft Windows Vista Business or Enterprise
Edition SP1 or later
Microsoft Windows 2003 Server
Microsoft Windows 2008 Server
Hard disk
Type and format
IDE or SCSI drive (NTFS format is required)
Capacity
40GB or higher
Network
100 Base-TX network interface card is required.
Required components
TCP/IP and Client for Microsoft Networks
IMPORTANT
Depending on how the device is used, a system with higher
specifications may be required. For details, refer to the eCopy
ShareScan 4.5 Installation and Setup Guide (electronic
manual).
❏ Installing Services Manager
Install Services Manager (and other necessary software)
on the computer using the eCopy ShareScan 4.5 Setup CD-
ROM supplied with the device.
IMPORTANT
We recommend installing Services Manager on a computer that
has a static IP address assigned.
1.
Insert the eCopy ShareScan 4.5 Setup CD-ROM into
the CD-ROM drive on the computer.
The [Launch] window appears.
Hint
If the [Launch] window does not appear, access the CD-ROM
using Windows Explorer and run ShareScan.exe from the CD-
ROM.
2.
Click [Software Installation].