Section 8.2- tests, checks and adjustments, Ignition coil, Primary winding resistance at 68* f. (20‘ c.) – Generac 86640 User Manual

Page 82: 1.5 ohms, Secondary winding resistance at 68* f. (20* c.), Checking the condenser, Distributor cap and rotor head, Contact set, Breaker point gap, 0.022 inch (0.45-0.55mm)

Advertising
Section 8.2- tests, checks and adjustments, Ignition coil, Primary winding resistance at 68* f. (20‘ c.) | 1.5 ohms, Secondary winding resistance at 68* f. (20* c.), Checking the condenser, Distributor cap and rotor head, Contact set, Breaker point gap, 0.022 inch (0.45-0.55mm) | Generac 86640 User Manual | Page 82 / 120 Section 8.2- tests, checks and adjustments, Ignition coil, Primary winding resistance at 68* f. (20‘ c.) | 1.5 ohms, Secondary winding resistance at 68* f. (20* c.), Checking the condenser, Distributor cap and rotor head, Contact set, Breaker point gap, 0.022 inch (0.45-0.55mm) | Generac 86640 User Manual | Page 82 / 120
Advertising
See also other documents in the category Generac Generators: