Canon B820 - Manual (Page 68)

7-6
Recording voice memos
Use this feature when you are going out and want to leave a message for another member of the
family. Use the microphone on the operation panel to record your voice memo.
Only one voice memo, 30, 60, or 120 seconds*, can be recorded. If you record a new voice
memo when there is already a voice memo recorded, the old voice memo will be deleted.
-or-
* The recording time for a voice memo can be set to the same settings as the recording time for
a telephone message. However, if you set 0 as the recording time for each telephone message,
voice memo recording time will be set to 30.
1 Press [Function].
2 Use [ ] or [ ] to select MSG REGISTRATION.
   
Press [Start/Copy].
3 Use [ ] or [ ] to select VOICE MEMO.
4 Press [Record] and speak into the microphone to record your voice memo.
The remaining recording time is displayed on the LCD.
-or-
Press [Start/Copy], use [
] or [ ] to select RECORD and press [Start/Copy] again. Then
speak into the microphone to record your voice memo.
5 Press [Stop] twice when recording is finished.
The fax returns to standby mode.
1 Press [Record].
2 Press [Record] or [Start/Copy]. Then speak into the microphone to record your voice
memo.
The remaining recording time is displayed on the LCD.
3 Press [Stop] when recording is finished.
The fax returns to standby mode.
TIME LEFT 29
15:00 :00
To play a voice memo, repeat step 1 to 3 above and then press [Play]. Alternatively, carry out
step 1 to 3 above, press [Start/Copy], select PLAY and then press [Start/Copy].
RECORD A MESSAGE
TIME LEFT 29