DENSO CORPORATION MOVINCOOL OFFICE PRO 24 - Manual (Page 13)

For all models:
1) A digital electronic control panel, which allows the user to control
the unit’s operation easily.
3) Digital LCD display with blue backlight that indicates:
7) A condensate drain TANK FULL indicator (LED) and display (LCD).
FEATURES
2) Dual fan speeds (either HIGH or LOW) in both COOL and Fan Only
modes.
4) The Set point Temperature can be adjusted between 65°F and 90°F
by the SET TEMP buttons.
9) A programmable Clock/Timer function. This allows the user to
program a specific time and day that the unit will begin to
operate/start and turn off/end (Automatic Operation).
8) An automatic restart feature when the power is lost and regained.
The unit will return to the operating mode it was in prior to the loss
of power. Any preset program will be retained in the memory in the
event power loss occurs.
h. Key Locked option
g. Status Codes
f. Program Run and Stop
e. Program Start time and Stop time
d. Cool Mode Status
c. Fan Speed Status
b. Room Temperature and Set Point Temperature
(either Fahrenheit or Celsius).
a. Clock with day and time.
13
5) Fire alarm control panel connection ready for automatic
shut off.
㧖
6) Automatic shut off and warning signal output and alarm for
temperature sensor failure, cooling failure.
Not available for OP 12 Model.
㧖
㧖