Dixon SPDZTR 30 - Manual (Page 40)

maIntenanCe
40
Adjusting the Mower Deck
Check the tire pressure before adjustment of the
mower deck. See “Checking Tire Pressure” in
Maintenance section. Faulty mower deck adjustments
will cause an uneven mowing result.
Leveling deck
Position the mower on a level, preferably 1.
concrete, surface.
Check the pressure in all four tires. See “Technical
2.
Data” section.
Rotate blade to align side to side.
3.
Turn front adjuster nut(s) to level deck side to 4.
side.
WARNING!
Before performing any service or adjustment checklist:
1. Engage the parking brake.
2. Place the Blade switch in the disengaged position.
3. Turn ignition switch to “OFF” position and remove the key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
come in contact with the plug.
WARNING!
Blades are sharp. Protect your hands
with gloves and/or wrap blades with a
heavy cloth when handling.
IMPORTANT INFORMATION
This procedure will place the mower in a base
measurement position. Additional adjustment
may be required to achieve desired cut for the
type of grass or conditions involved.
8050-015
Side to side adjuster nut