Digi MIL-S3130 - Manual (Page 3)

2
P
ACKAGE CONTENTS
Before you begin, verify that your package contains the following items:
!
4-port or 8-port 10/100 dual speed switch
! AC power adapter
!
Mounting kit for wall mount
!
Installation guide
H
OW TO USE THE 4 OR 8-PORT 10/100 DUAL SPEED SWITCH
LED’s
The LED’s on the front panel show the following status:
!
Status of the switch’s power supply
! Connection speed of 10 Mbps or 100 Mbps
! Data activity on the segment
!
Full/half duplex operation mode
Power
Green
The system detects the power
signal.
OFF No power.
10 Mbps/Hdx/Act
Green
A good connection is established,
and the 10 Mbps link pulse is
detected. The operation mode is
negotiated at full duplex.
Flashing Green The port operates in full duplex,
indicating that data is being
received or transmitted.
Amber A connection is established, and
the 10 Mbps link pulse is detected.
The operation mode is negotiated
at half duplex.
Flashing Amber The port operates in half duplex,
indicating that data is being
received or transmitted.
Off No link established.
100 Mbps/Hdx/Act
Green A good connection is established,
and the 100 Mbps link pulse is
detected. The operation mode is
negotiated at full duplex.
Flashing Green The port operates in full duplex,
indicating that data is being
received or transmitted.