Jacking and changing a tire – Dodge 2009 Challenger User Manual

Page 350

Advertising
background image

2. Set the parking brake.

3. Place the shift lever into PARK (automatic transmis-
sion) or REVERSE (manual transmission).

4. Turn OFF the ignition.

5. Turn on the Hazard Warning flashers.

6.

Block the front and rear of the

wheel diagonally opposite of the jack-
ing position. For example, if changing
the right front tire, block the left rear
wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

Jacking and Changing a Tire

WARNING!

Carefully follow these tire changing warnings to help
prevent personal injury or damage to your vehicle:
Always park on a firm, level surface as far from

the edge of the roadway as possible before raising
the vehicle.

Block the wheel diagonally opposite the wheel to

be raised.

Set the parking brake firmly and set an automatic

transmission in PARK; a manual transmission in
REVERSE.

Never start or run the engine with the vehicle on a

jack.

Do not let anyone sit in the vehicle when it is on a

jack.

(Continued)

348

WHAT TO DO IN EMERGENCIES

Advertising
This manual is related to the following products: