Airos notifications, Pending changes – Ubiquiti Networks Rockeac User Manual

Page 6

Advertising
background image

3

Chapter 1: Overview

airOS®7 User Guide

Ubiquiti Networks, Inc.

The lower half of the navigation bar contains links to
additional tools and information:

“Tools and Information” on page 36

displays a list of network administration and monitoring
tools.

“Info” on page 41 displays device

information.

“Log” on page 41 displays system log

messages.

airOS Notifications

Pending Changes

When you make changes, the Pending changes section
is displayed at the bottom of the page and lists all pages
where changed settings have not been saved:

To cancel the unsaved changes on a specific page, click
the page’s name.
Use the buttons on the right to perform operations on all
unsaved changes. You have three options:

Test Changes

Click Test Changes to try changes without

saving them. You have two options:

Apply

Click Apply to save changes.

Discard

Click Discard to cancel changes.

Note:

If you do not click Apply within 180 seconds

(the countdown is displayed), the device times out
and resumes its earlier configuration.

Revert Changes

Click Revert Changes to cancel all

changes on all pages.

Save Changes

Click Save Changes to immediately apply

and save changes.

Advertising
This manual is related to the following products: