License light, Fluids and capacities – Dodge 2008 Charger User Manual

Page 418

Advertising
background image

9. Disconnect the bulb from the socket assembly and
install the replacement bulb.

10. Reinstall the bulb and socket assembly into the tail
light assembly, and then turn it clockwise.

11. Reinstall the tail light assembly, fasteners, electrical
connector, and trunk liner.

12. Close the trunk.

License Light

1. Remove the screws securing the light to the rear fascia.

2. Remove the bulb and socket assembly.

3. Disconnect the bulb from the socket assembly and
install the replacement bulb.

4. Reinstall the bulb and socket assembly.

5. Reattach the light to the rear fascia, and then install the
screws.

1 — License Light Bulb
2 — Socket

418

MAINTAINING YOUR VEHICLE

Advertising
This manual is related to the following products: