Testing of safety interlock systems, Testing of safety interlock systems -31, Operation instructions – Dixon GRIZZLY 52 KOH/968999588 User Manual

Page 30: Warning

Advertising
background image

OPERATION INSTRUCTIONS

30

TESTING OF SAFETY INTERLOCK SYSTEMS

The following tests should be performed at the start of each

mowing day.

PARK BRAKE SWITCH TEST

1. Swing control levers to outward position.

2. Disengage blade drive.

3. Put park brake in OFF position.

4. Turn ignition switch to START.

Engine should not turn over or attempt to start.

CONTROL LEVER SWITCH TEST

1. Disengage blade drive.

2. Put park brake in ON position.

3. Swing control levers inward.

4. Turn ignition switch to START.

Engine should not turn over or attempt to start.

NOTE: If any safety check fails, do not operate the mower until

the system has been checked and repaired by an
authorized Dixon dealer.

WARNING

!

Failure to observe the following instructions
could result in serious injury or death.

Advertising
This manual is related to the following products: