Bacnet/ip parameters, Bacnet/ip udp port (default value = 0xbac0), Bacnet/ip network (default value = 1) – Contemporary Control Systems BASrouter Portable Installation Guide (Firmware 2.6.x) User Manual

Page 14: Ip address (default value = 192.168.92.68), Ip subnet (default value = 24), Ip gateway (default value = 192.168.92.1)

Advertising
Bacnet/ip parameters, Bacnet/ip udp port (default value = 0xbac0), Bacnet/ip network (default value = 1) | Ip address (default value = 192.168.92.68), Ip subnet (default value = 24), Ip gateway (default value = 192.168.92.1) | Contemporary Control Systems BASrouter Portable Installation Guide (Firmware 2.6.x) User Manual | Page 14 / 20 Bacnet/ip parameters, Bacnet/ip udp port (default value = 0xbac0), Bacnet/ip network (default value = 1) | Ip address (default value = 192.168.92.68), Ip subnet (default value = 24), Ip gateway (default value = 192.168.92.1) | Contemporary Control Systems BASrouter Portable Installation Guide (Firmware 2.6.x) User Manual | Page 14 / 20
Advertising
This manual is related to the following products:
See also other documents in the category Contemporary Control Systems Hardware: