Transport, Safety – Dixon SpeedZTR 965882301 User Manual

Page 16

Advertising
background image

SAFETY

16-

DIXON

8011-514

Regularly clean deck

The blades are sharp and can cause cuts and

•

gashes. Wrap the blades or use protective

gloves when handling them.
Check the parking brake’s functionality

•

regularly. Adjust and service as necessary.
The mulch blades should only be used in

•

familiar areas when higher quality mowing is

desired.
Reduce the risk of fire by removing grass,

•

leaves, and other debris that may have

accumulated on the machine. Allow the

machine to cool before putting it in storage.
Regularly clean deck and underside of

•

deck, avoid spraying engine and electrical

components with water.

Transport

The machine is heavy and can cause serious

•

crushing injuries. Be extra cautious when it is

loaded on or unloaded from a vehicle or trailer.
Use an approved trailer to transport the

•

machine. Activate the parking brake, turn off

the fuel supply, and fasten the machine with

approved fastening devices, such as bands,

chains, or straps, when transporting.
Do not operate this machine on public

•

roadways.
Check and abide by local traffic regulations

•

before transporting the machine on any road.
Do not tow this machine, it may cause damage

•

to the drive system.
Do not tow any trailers, etc. with this mower.

•

They may jackknife or overturn causing

damage to the mower and possibly serious

injury to the operator.
Load the unit onto truck or trailer by driving up

•

ramps of suitable strength using a slow speed.

Do not lift! The machine is not intended to be

lifted by hand.

WARNING!
Escaping hydraulic oil under pressure

can have sufficient force to penetrate

the skin, causing serious injury.

If injured by escaping fluid, see a

doctor at once. Serious infection

or reaction can develop if proper

medical treatment is not administered

immediately.

IMPORTANT INFORMATION
The parking brake is not sufficient to lock the

machine in place during transport. Ensure that

the machine is well fastened to the transport

vehicle. Always reverse the machine onto the

transport vehicle to avoid tipping it over.

Advertising