Dodge 2008 PM Caliber - Manual (Page 242)

Autostick
ா Operation
NOTE: Autostick
௡ is not functional until the CVT
warms up in cold weather.
Autostick ௡ operation is activated in the DRIVE position
by moving the shift lever side-to-side. Moving the shift
lever to the (+) side will activate Autostick
௡ and shift up
to the next higher manual ratio, unless you are already
operating in or near Overdrive, in which case 6th ratio
will be selected. In like manner, moving the shift lever to
(-) will activate Autostick
௡ and shift to the next lower
manual ratio. After Autostick ௡ is activated, the manual
ratio selected is displayed in the transmission ratio
display and tipping the shift lever to the (+) or (-)
direction will cause an upshift or downshift by one ratio.
Autostick
௡ Shifter
240 STARTING AND OPERATING