Fog lights, Tail lights, rear turn signals and backup, Lights — replacement – Dodge 2008 PM Caliber User Manual
Page 358
Advertising
Fog Lights
1. Access light through the lower fascia cutout.
2. Rotate bulb and connector 1/4 turn counterclockwise.
3. Pull bulb off connector.
Tail Lights, Rear Turn Signals And Backup Lights
— Replacement
1. Remove the two push-pins from the tail light housing.
2. Grasp the tail light and pull firmly to disengage the
light from the aperture panel.
Fog Light and Connector
Removing Push-Pins
356
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: