Jacking instructions – Dodge 2010 Journey User Manual

Page 388

Advertising
background image

4. Tilt the retainer at the end of the winch cable and drop
it through the center of the wheel. Then place the spare
tire with the cable and retainer underneath the vehicle.

5. Fit the assembled jack-handle over the winch drive
nut. Rotate the jack-handle assembly clockwise to raise
the spare tire into the storage area. Continue to rotate the

jack-handle assembly until you hear the winch mecha-
nism click three times. It cannot be over tightened. Push
against the tire several times to be sure it is held securely
in place.

Jacking Instructions

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far from

the edge of the roadway as possible before raising
the vehicle.

Block the wheel diagonally opposite the wheel to

be raised.

Set the parking brake firmly and set an automatic

transmission in PARK.

(Continued)

Spare Tire Retainer

6

WHAT TO DO IN EMERGENCIES

387

Advertising
This manual is related to the following products: