Fuel shut off valve, Cutting height adjuster, Controls – Dixon Kohler Ram Ultra 27 User Manual

Page 23

Advertising
background image

CONTROlS

Dixon-

23

Fuel Shut Off Valve

The fuel shut off valve is located at the left rear of the

seat. The valve is off when the handle tab is turned

perpendicular to the fuel line.

8011-419

Fuel shut off valve in the CLOSED position

Cutting Height Adjuster

The deck cutting height is obtained by pressing the

foot pedal forward to lift the deck. To lower the deck,

apply pressure to the top side of the foot pedal and

allow it to pivot while the lift arm rotates to the rear of

the unit. To stop in the desired cutting position, rotate

the foot pedal down into the notch in the height plate.

The cutting height range is from 1½" (38mm) to 4½"

(114mm) in ¼ (6mm) increments. The heights are

measured from the ground up to the blade tip with the

engine not running.

IMPORTANT INFORMATION
Always use the high position to transport.

8050-117

The mower deck’s lifting lever

IMPORTANT INFORMATION
In order to obtain an even cutting height,

it is important that the air pressure in the

front tires is 15 psi and the rear tires is 10

psi.

Advertising