License light, Fluids and capacities – Dodge 2009 Charger User Manual
Page 428
Advertising
![background image](/manuals/78017/428/background.png)
11. Reinstall the tail light assembly, fasteners, electrical
connector, and trunk liner.
12. Close the trunk.
License Light
1. Remove the screws securing the light to the rear fascia.
2. Remove the bulb and socket assembly.
3. Disconnect the bulb from the socket assembly and
install the replacement bulb.
4. Reinstall the bulb and socket assembly.
5. Reattach the light to the rear fascia, and then install the
screws.
1 — License Light Bulb
2 — Socket
426
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: